Sale closed
Category
Exclude closed lots
Sort :
Previous|12|Next Results: Viewing items 1-100 of 126. Items per page:
Image Lot # Item Title Quantity Warranty Location Sire Dam Breed Date of Birth Sex Other Estimate Time Left Price
Previous|12|Next Results: Viewing items 1-100 of 126. Items per page:
1 BEFORE YOU BID, PLEASE READ THE AUCTION TERMS -

The auction terms are located at the bottom of the Auction Info / View Auction page. You are also required to approve these terms when registering for this auction. Information included in the terms are payment info, buyer’s premiums, auction location, preview and pick-up info as well as shipping info.

Sale has ended!
1a WHY SHOULD I ATTEND THE PREVIEW? - All items are sold AS IS, WHERE IS, with NO WARRANTY expressed or implied. It is the responsibility of the buyer to determine the condition of the items and bid accordingly. Attending the preview is highly recommended so you, the bidder, can judge the quality of the items for yourself. Sale has ended!
Unsold
CLOSED!
1b PREVIEW DAY -

The PREVIEW DAY for this auction is Thursday, September 14th from 4:00-6:00 pm & Tuesday, September 19th from 4:00-6:00 pm at 6443 IL 1 in Mt. Carmel, IL  (Cowling, IL)

Other preview times can be arranged by calling the auction company at 812-474-6100.

Sale has ended!
Unsold
CLOSED!
1c PAYMENT/PICK-UP DAY -

Equipment Pick-Up Conditions: Due to the crowded conditions at the building where the equipment is located check-out will be by appointment only. Appointments will be available starting September 27th, 28th, and 29th Please contact CMAR at 812-474-6100 to set-up your appointment. There will be an onsite rigger available to assist people needing help loading. A fee structure for loading each item is under documents at the top of the auction information page. For people wanting to arrange their own rigging a certificate of insurance naming Curran Miller Auction/Realty, their agents and employees, Phil and Lisa Barnett, Barnett Machine Tools, Inc., First National Bank of Allendale, their agents and employees as additional insured will be required. Appointments for bidder providing their own rigging will start the week following the auction closing date. Please contact auction company with any questions.

Anything over 15,000 pounds buyers will have to arrange their own rigging and rigger must supply a certificate of insurance.

The TD150D fork truck WILL NOT be available for pick-up until Tuesday, October 3rd.  This machine will be reserved to help load equipment until that date.

Sale has ended!
Unsold
CLOSED!
1d EXTENDED BIDDING - This auction features EXTENDED BIDDING! This feature extends the bidding on a lot for FIVE minutes past the closing time, if a bid has been placed on that lot within the last FIVE minutes of the auction. The lot will remain open until there are no bids on that lot for FIVE minutes. This only affects lots with last minute bids. Any lot not bid on in the last FIVE minutes will continue to close at their normal times. Sale has ended!
Unsold
CLOSED!
1e MAXIMUM BIDDING - This auction features MAXIMUM BIDDING. When you place your MAX BID, the current bid price does not automatically go to your max bid. Someone else has to bid to increase the current price and the computer will automatically bid up to your max in the increments specified. If someone has already entered a MAX BID item you are bidding on, the system will automatically bid for you until you are the current high Bidder or you reach your MAX BID. If you have reached your MAX BID and are still not the current high Bidder, the system will give you the opportunity to enter another MAX BID. You may request out bid notices when registering for your online bidding account. You can choose to have them sent to your email, cell phone via text message or both. If you are not able to be around a computer/mobile device during the closing of the auction or receive and/or read your outbid notices, we HIGHLY RECOMMEND you enter your MAX BID when bidding. Your MAX BID would be considered the maximum amount you are willing to pay for your item. Please remember, you can always raise your max bid, but you CANNOT lower it. Be aware of this while bidding. Sale has ended!
Unsold
CLOSED!
1f BUYER’S PREMIUM & PAYMENT METHOD -

A 10% Buyer's Premium will be added to all items. Payment must be made in full on day of pickup by cash, check, VISA, Mastercard or wire transfer. Credit cards will not be accepted for invoices totaling over $5,000.

Sale has ended!
Unsold
CLOSED!
1g MORE PICTURES & DETAILED LOT INFORMATION - If you click on the lot title, it will bring you to a screen with a complete lot description as well as more pictures. Make sure to scroll through all pictures. Sale has ended!
Unsold
CLOSED!
301 Toyoda Universal Cylindrical Grinder - Model: GUP 32 x 100
Machine Number: RCI 4201
With a GC250A CNC Control

 
1 Sale has ended!
High bid:
$80(1968gwa)
302 VERSON 150 TON PRESS - Tonnage: 150 tons
Ram Stroke: 8”
Ram Adj: 6”
Shut Height: 22”
Bed Size: 50” l-r x 30” f-b
Ram Size: 34” f-b x 24” f-b
Throat Depth: 12”
Opening thru Back: 26-1/4”
Strokes Per Minute: 35
Dimensions: 140”l x 80”w x 192”h
Weight, approx: 40,000 lbs.

Air Clutch and Brake Powered Ram Adjustment
Air Counter Balance T-Slotted Ram and Bolster
Brake Monitor Auto Lube System
Remote Dual Palm Control Stand
 
1 Sale has ended!
High bid:
$310(1968gwa)
303 Airam press - Serial Number: 3811-4-81-1020
Bed: 36” x 111”
 
1 Sale has ended!
High bid:
$500(Holman)
304 Braner Slitting Line - 6 pc 48” x 20,000 lb slitting line
 
1 Sale has ended!
High bid:
$4,000(rymoso01)
305 Fosdick radial drill - N/A 1 Sale has ended!
High bid:
$400(1968gwa)
306 CINCINNATI BICKFORD SUPERSERVICE RADIAL ARM DRILL - S/N: 6NE 56
Model: SuperService

Arm Size: 7’
Column Diameter: 19”
Max Ht Under Arm: 72”
Spindle Speeds: 8 – 1000 RPM
Spindle Taper: #6 MT
Spindle Travel: 24”
Spindle Dia: 4”
Spindle Feeds: .0240 to .125 IPR
Main Motor: 20 HP
Weight (approx): 35,000 lbs.

Equipped With:
Power Clamping Power Elevation
Power Rapid Traverse to Head Push Button Controls



 
1 Sale has ended!
High bid:
$410(Cpartee67)
307 125-2 HD Timesaver -
Model: 125-2 HD * Year: 1982 * S/N: 11403

Specifications:

2-Head: 24” Width Cap
First Head: 6” Diameter Rubber Covered Contact Roll, 20 HP Motor
Second Head: 2 ½” Wide Finishing Platen, 15 HP Motor
Abrasive Belts: 25” x 60”
“Posi-Trak” Electronic Tracking and Pneumatic Tensioning, 15 – 45 FPM
Variable Speed Feed

Equipped With:
*Double Infeed and Outfeed Spring Loaded Hold-down Rolls
*0”-8” Maximum Manual Part Thickness Opening with Mechanical Digital Readout
*Air Operated Disc Brakes
*Motor Load Meters
*21” Infeed Conveyor Extension
*Infeed Emergency Stop
 
1 Sale has ended!
High bid:
$575(Jacob ferguson)
308 Cincinnati vertical 210-12 milling machine - SN 4A2V5P-2 1 Sale has ended!
High bid:
$925(200796)
309 Delta Radial Arm Saw - N/A 1 Sale has ended!
High bid:
$120(dgs9503)
310 No. 4 Warner Swasey Turret Lathe -

SPECIFICATIONS

SN: 720343 2470352
Model : M14-20
Lot No: 145
Bar Cap: 2"
Swing: 18-1/8"
Weight: 4000 lbs.
Headstock Oil Reservoir Cap: 31/2 gallons
 

EQUIPPED WITH

Twin Disc Clutch
Preselector Head
3-Jaw Chuck

 
1 Sale has ended!
High bid:
$300(dgs9503)
311 Elliot 921 surface grinder 480 volt - N/A 1 Sale has ended!
High bid:
$41(nevetssurplusco)
312 CINCINNATI HEAVY DUTY PEDESTAL GRINDER WITH DUST COLLECTOR -

Specifications

Serial Number: 248164
Model Number: SPL
Type: 602-202-8
Wheel Size: 12”
Spindle Speed: 1800 RPM
 
1 Sale has ended!
High bid:
$55(dgs9503)
313 Dennison 6 Ton MultiPress -

SN: 11416 T7

Model No: DFGC01C18A59A12519

Motor: 5 HP

Capacity: 6 Ton

 

; 34"T
1 Sale has ended!
High bid:
$250(alleni)
314 12 ton Denison Multipress - *Model: T120HC209SSD268D276JA72IT106R*
*S/N: 952-H

Specifications:

Capacity: 12 tons
Cycle Bore: 4.0”
Stroke: 12”
Daylight: 18”
Throat: 10”
Ram Diameter: 2.75”
Tank Capacity: 20 gal.
Max. PSI: 1910
Pump gpm: 9

Motor Specifications:

Horse Power: 10
RPM: 1800
Voltage/Phase/Cy: 220/3/60



 
1 Sale has ended!
High bid:
$550(1968gwa)
315 DENNISON 10 TON MULTIPRESS WITH ROTARY TABLE -

Specifications

Serial Number: 14893 A81505 T1
Model Number: CC10C01A68D15
Capacity: 10 Tons
Drive Motor: 10 HP
Input Power: 220/440

Equipped With
Indexing Table with 6 Stations
Allen Bradley PLC Control
 
1 Sale has ended!
High bid:
$270(Holman)
316 Dennison MultiPress 50 Ton Capacity - Serial Number: 12713-S029 276B-P15
Model Number: NA50C97A129D03D28
 
1 Sale has ended!
High bid:
$400(1968gwa)
317 Man-au-cycle copy lathe - N/A 1 Sale has ended!
High bid:
$160(nevetssurplusco)
318 Elb hydraulic surface grinder - N/A 1 Sale has ended!
High bid:
$160(nevetssurplusco)
319 American Steel Line Uncoiler - *Model: 60 * S/N: 2293*

Specifications:
Maximum Weight 2500 lbs.
Maximum Coil O.D. 50 in.
Maximum Speed (FPM) 30-65
Drive Motor 1 HP
 
1 Sale has ended!
High bid:
$60(Holman)
320 P/A Industries Uncoiler - Model: SRA1200 
S/N: X15475/58663

Specifications:
Maximum Weight 1200 lbs.
Maximum Stock Width 12 in.
Maximum Coil O.D. 48 in.
Expansion Range 10-22 in.
Maximum Speed (RPM) 0-23
Drive Motor ¾ HP
Input Power 120/1/60
 
1 Sale has ended!
High bid:
$75(Holman)
321 Carboloy tool grinder - N/A 1 Sale has ended!
High bid:
$200(dgs9503)
322 Cooper-Weymouth Peterson Coil Feed - *Model: 12-B S/N: 19812*

Specifications:
Maximum Weight 8000 lbs.
Maximum Stock Width 12 in.
1 Sale has ended!
High bid:
$50(Holman)
323 Cooper-Weymouth Peterson Coil Feed - *Model: 4R-18 * S/N: 19813

Specifications:

Stk. Width: 18 IN
Speed:
120-1200 IPM
Power Supply: 115 volt phase/60 HZ
 
1 Sale has ended!
High bid:
$47(Holman)
324 HMT Hot Melt machine by Proflex - N/A 1 Sale has ended!
High bid:
$41(Holman)
325 Littell Coil Straightener - N/A 1 Sale has ended!
High bid:
$70(Holman)
326 RO Lee Tool Grinder - Model No: 40097-A 1 Sale has ended!
High bid:
$27(Holman)
327 IMPERIAL MARKING & ENGRAVING PRESS - N/A 1 Sale has ended!
High bid:
$55(Holman)
328 Cincinatti Bickford 24" drill press - N/A 1 Sale has ended!
High bid:
$85(alleni)
329 Miller Model SRH 303 230-460 Volt Welder - Includes welding helmet 1 Sale has ended!
High bid:
$210(robconserv)
330 Gary Slitting head - S/N: 62006
Model: 626 1722 24
 
1 Sale has ended!
High bid:
$110(Holman)
331 Polycloin filtration system - Model 040-200 SN 2119 1 Sale has ended!
High bid:
$110(1968gwa)
332 DoAll - SN 517-95153  Model C-305a 1 Sale has ended!
High bid:
$350(Holman)
333 Fosdick 24" single spindle drill - Power Feed and Vise

 
1 Sale has ended!
High bid:
$60(1968gwa)
334 Rivvett lathe - N/A 1 Sale has ended!
High bid:
$27(nevetssurplusco)
334A Powermatic drill press - Model 1150; serial number 67-742; condition unknown 1 Sale has ended!
High bid:
$55(nevetssurplusco)
335 ReRun II Automatic Deblistering Machine -

SN: 91-001

Model No: RR11

 

1 Sale has ended!
High bid:
$16(juncer)
336 Mocon Pac Guard 400 Leak Detection System -

SN: 1093119

P/N: 140-012

P/N: 001-016

1 Sale has ended!
High bid:
$3(juncer)
337 FMC feed unit - SN 0037138 115 Volts 1 Sale has ended!
High bid:
$6(juncer)
338 A7 Pedrick bender - SN 1899 1 Sale has ended!
High bid:
$400(Holman)
339 Walker Turner drill press Rockwell multi drill drill head SN 7094 Model 4-15 - SN 1633526 1 Sale has ended!
High bid:
$43(Cpartee67)
340 Vidicom Qualifier 866 - SN VQ866-037 1 Sale has ended!
High bid:
$21(juncer)
341 Toyosk Multi spindle drill -

Model No: 01-D

Date: 1984-6

Mfg No: 2537


 
1 Sale has ended!
High bid:
$21(juncer)
342 Dewalt radial arm saw - SN 64090017 Model 542021-06 1 Sale has ended!
High bid:
$31(circlef)
343 Aerostar automatic quick change die system - N/A 1 Sale has ended!
High bid:
$16(juncer)
344 GNL hydraulic surface grinder - N/A 1 Sale has ended!
High bid:
$130(1968gwa)
344A Misc press parts - N/A 1 Sale has ended!
High bid:
$80(1968gwa)
345 Cincinnati universal OD grinder with attachments - 2U3D5B-13 1 Sale has ended!
High bid:
$110(1968gwa)
346 Hayke WK 140 chiller - N/A 1 Sale has ended!
High bid:
$12(alleni)
347 Haake wk 140 chiller - N/A 1 Sale has ended!
High bid:
$12(alleni)
348 Neslab CFT 75 chiller - N/A 1 Sale has ended!
High bid:
$12(alleni)
349 G&P Machinery Buffing Polishing Lathe - S/N: G 10 489
Model: SS-500
5 HP
Mid 90’s machine
1 Sale has ended!
High bid:
$330(Jacob ferguson)
350 Fosdick 5ft arm radial drill; 13" column - N/A 1 Sale has ended!
High bid:
$350(nevetssurplusco)
350a 2 cylinders off of 2000 ton Pacific Press Break - N/A 1 Sale has ended!
High bid:
$80(1968gwa)
351 American -Hole Wizard 5 ft radial arm drill - N/A 1 Sale has ended!
High bid:
$350(nevetssurplusco)
352 NORTON HYDRAULIC SURFACE GRINDER -

SPECIFICATIONS

Model Number: S1
Capacity: 12” x 36”
Clearance Under Wheel: 17”
Wheel Size: 14” x 1” x 5”
Longitudinal Table Traverse: 40”
Automatic Cross Travel: 13-1/4”
Hydraulic Table Travel: 0 – 125 RPM
Hydraulic Cross Travel: 0 to 1/2 IPM

Vertical Travel of Wheel Head: 18”

EQUIPPED WITH

Power Spindle Elevation
Hydraulic Over the Wheel Dresser
Automatic Lubrication System
Coolant System
5 Hp Spindle
5 HP Hydraulic Unit
1/4 HP Lubrication
 
1 Sale has ended!
High bid:
$260(dgs9503)
353 CINCINNATI No. 4 HORIZONTAL MILL -

SPECIFICATIONS

Serial Number: 4A4P1K136P
Model Number: ER
Table: 16” x 78-1/2”
Taper: #50
Overarm Supports
 
1 Sale has ended!
High bid:
$250(1968gwa)
354 Swift Ohio Rotary Table -
SN: M996
Specifications:
Diameter: 72”
Table: T-Slotted
Rotation: Power Rotation
Capacity: 50 Ton
 
1 Sale has ended!
High bid:
$410(dgs9503)
355 Bridgeport Interact 412 CNC Vertical Turning Center - Serial Number: 75502 A
Model: INT 412 V
Year: 1989

SPECIFICATIONS
X Axis Travel: 17.72”
Y Axis Travel: 12.55”
Z Axis Travel: 11.8”
Table Size: 33.10” x 12.60”
ATC: 12 tools
Spindle Taper: #40
Spindle Speeds: 40-4000 RPM
Spindle HP: 7.5 HP

EQUIPPED WITH

Heidendain TNC-2500 CNC Control
12 Station Tool Changer
Automatic Lubrication
Full Guarding
Coolant System
Misc. Tooling

 
1 Sale has ended!
High bid:
$130(1968gwa)
356 Cincinnatti OD lathe w/ internal spindle - N/A 1 Sale has ended!
High bid:
$110(1968gwa)
357 Wilton drill press; - 430v; spindle rpm 85-1460 460 volt 24204 type 1 Sale has ended!
High bid:
$55(Cpartee67)
358 Procuiner Multi-Spindle wirh Dunmore tapping control SN 3187 -

SN: 1681

Model: MK

Series: 34001

1 Sale has ended!
High bid:
$27(juncer)
359 Landis Cylindrical Grinder -

SN: 733-4

10" Type K

Year: 1963 or 1964

1 Sale has ended!
High bid:
$160(nevetssurplusco)
360 Englo 10hp air compressor - 230/460 voltage 1 Sale has ended!
High bid:
$160(200796)
361 HTC Press - * Model: 152MS * S/N: 270320 *
Specifications:
Tonnage Forming 150 ton
Tonnage Punching 100 ton
Bed Size 48 in. x 144 in.
Stroke 7 in
Die Height Open 14 in.
Die Height Closed 7 in.
Window Opening 24 in.
Inside Width 149 1/2 in.
Outside Width 168 in.
Bed Height 37 1/2 in.
Overall Height 123 in.
Approximate Weight 46,000 lbs.
Electrics 20 HP 220/440 3 Phase
 
1 Sale has ended!
High bid:
$1,100(1968gwa)
362 Caterpillar 4000 lb forklift - Sideshift; 48" forks 1 Sale has ended!
High bid:
$3,100(catfish274)
363 Caterpillar T150D fork truck -

15,000 # capacity; ser # 5MB1851; 72" forks

NOTE: This item will not be available for pick-up until October 3rd. It will be retained to assist people with loading their items.

1 Sale has ended!
High bid:
$5,750(catfish274)
364 Imperial Marking machine - M1853; laying on its side 1 Sale has ended!
High bid:
$16(1968gwa)
365 Vacu sand blast system - N/A 1 Sale has ended!
High bid:
$47(catfish274)
365a Surface Roughness Gage -

H.B. Tool Co Newark, NJ

Sale has ended!
High bid:
$1(juncer)
376 International service truck Model 4700 - Mileage 92,758 Hours 15636 Automatic transmission VIN 1HTSCAAM6TH285108 1 Sale has ended!
High bid:
$3,100(1968gwa)
379 Bucyrus model 360-C crane - N/A 1 Sale has ended!
High bid:
$3,600(Amelia123)
381 Genie GS 2646 scissor lift for parts - N/A 1 Sale has ended!
High bid:
$160(alleni)
382 Heavy duty dual front wheel fork lift 18' 1" max mast height - 10' forks, Detroit engine 30,000 pound capacity (unsure of true capacity) 1 Sale has ended!
High bid:
$4,300(dgs9503)
383 2 pcs of plate steel 1/2" thick x 90" wide x 20' 2" long other piece is 24' long - N/A 1 Sale has ended!
High bid:
$775(CRH1951)
384 8000 lb articulateing fork lift - Type RT840A SN 26-1694 20' mast 72" forks 1 Sale has ended!
High bid:
$4,500(kernfamilyfarms)
386 Bertram Lathe 153" between centers, swing is 16" - N/A 1 Sale has ended!
High bid:
$310(1968gwa)
386a Metal shelves & contents - Pulleys, electric motors; electrical parts & misc 1 Sale has ended!
High bid:
$110(Trhoc)
387 17' Columbus McKinnon 1 1/4" Rigging chain - N/A 1 Sale has ended!
High bid:
$55(kernfamilyfarms)
388 17' double rigging chain - 1 1/4" 1 Sale has ended!
High bid:
$55(kernfamilyfarms)
389 14' rigging chain - 7/8" 1 Sale has ended!
High bid:
$27(kentha)
390 24' rigging chain - 7/8" 1 Sale has ended!
High bid:
$50(kentha)
391 14' double rigging chain: 5/8" - N/A 1 Sale has ended!
High bid:
$95(kentha)
392 16' double rigging chain ; 7/8" - N/A 1 Sale has ended!
High bid:
$50(kentha)
393 7/8" x 10' rigging chain - N/A 1 Sale has ended!
High bid:
$16(kentha)
394 5/8" x 23' rigging chain - N/A 1 Sale has ended!
High bid:
$23(kentha)
395 1/2" x 9' rigging chain - N/A 1 Sale has ended!
High bid:
$31(kentha)
396 3/4" x 15' double rigging chain - N/A 1 Sale has ended!
High bid:
$75(kentha)
397 2 Aronson tank rollersone with motor-Bldg 2 - 7 3/8" w roller 1 Sale has ended!
High bid:
$3,400(randy8717)
398 2 Aronson tank rollers one with motor - W/ 5" rollers 1 Sale has ended!
High bid:
$1,100(martinmachinetool)
399 2 Aronson tank rollers both with motors - W/ 3" wide roller 1 Sale has ended!
High bid:
$370(1968gwa)
400 Aronson tank roller with motor, Webb tank roller with motor - W/ 7" w roller; 6 1/2" roller 1 Sale has ended!
High bid:
$1,900(martinmachinetool)
401 2 Aronson tank rollers - 4 3/4" wide roller 1 Sale has ended!
High bid:
$320(1968gwa)
powered by SAM